WS2812B WiFi Voice Music 2 output SPI Alexa Google Home Controller for WS2811 WS2812 WS2815 Light Strip IOS Android APP DC5-24V
Working Voltage: DC5-24V.
Instructions: three ways to connect the controller ( WiFi mode, Remote control via Internet mode, 1 to 1 mode ).
Output signal: support one-wire driver IC, able to control up to 2048 pixel.
Support: Android 4.0 or IOS 9.0 or higher.
APP name: Magic Home Pro.
Working temperature: -20℃-55℃.
Applications: Can use for WS2811, UCS1903, WS2812B, WS2813, WS2815, SM16703 etc pixels light strip.
Work with Alexa, Google Assistant.
Support 16 million color control and brightness adjustment.
Support for customised colors and preservation.
Group feature, Light timer.
Light and music rhythm synchronization function.
1 * LED Mini WiFi Controller (not include power adapter and LED strip).
2 * Cable wire.
1 * English Manual.
2 * 3M Double-sided Tap.
1. Why can’t my smart phone find the Wi-Fi signal of controller?
Please check if the controller has been connected with router or not, at the same time the Wi-Fi function of phone works properly.
2. Why can’t the controller connect with router?
Firstly, please ensure to input the correct Wi-Fi password.
If the password is correct and the controller still fails to connect with router, please shut down the controller and router, then turn on the router and the controller 30 seconds later. And wait for 2 minutes before you start the APP.
If the problem cannot solved after the above operations, please restore factory defaults.
3. Why doesn’t the controller show in the APP after choose the Wi-Fi signal of the controller in the phone setting?
Please refresh the APP device list by sliding down on the screen. If still not find the controller, please try to shut down the function of smart Internet selection of your smart phone settings. This is to avoid automatically exit the controller signal connection because of the unavailable network.
4. How to reset the controller?
Reset the WiFi controller by plug and unplug connector repeatly for 4 times, wait for 1-3 seconds each time you plug/unplug the connector.